The PVA material is an ideal complement to facilitate the use of priming in the carpfishing modality. Buy online the best PVA products for the carpfishing modality: PVA threads, PVA bags, PVA meshes, sponges or capsules made with PVA.

Best PVA Products for Carpfishing

Mesh Replacement 35 mm PVA Castaway

6,90 VAT included

Mesh Replacement 35 mm / 25 meters PVA Castaway

17,49 VAT included

PVA mesh in tube 60 mm Castaway

13,90 VAT included

Replacement mesh pva 32 mm ESP

7,90 VAT included

Mesh Replacement 25 mm PVA Castaway

6,90 VAT included

Mesh Replacement 60 mm PVA Castaway

6,90 VAT included

Mesh Replacement 60 mm / 20 meters PVA Castaway

18,15 VAT included

Slow pva bag Fox 75×175 mm

4,30 VAT included

Replacement mesh pva 20-25 mm ESP

7,90 VAT included

PVA mesh in 25 mm Tube Trybion

10,95 VAT included

25mm Trybion PVA Mesh Replacement

8,50 VAT included

Mesh Replacement 25 mm / 25 meters PVA Castaway

16,49 VAT included

Slow PVA mesh tube Fox 35mm

11,90 VAT included

Korda M 70×110 mm pva bag

4,99 VAT included

Slow pva bag Fox 60×130 mm

4,30 VAT included

Korda S 55×100 mm pva bag

4,99 VAT included

Long Fox needle for PVA

4,25 VAT included

Kit mesh pva ESP 25 mm

14,25 VAT included

Fast pva bag Fox 60x130mm

4,30 VAT included

Slow pva bag Fox 85x140mm

4,30 VAT included

Fast pva bag Fox 75x175mm

4,30 VAT included

Pva mesh kit ESP 32 mm

14,25 VAT included

Slow pva bag Fox 85×220 mm

4,30 VAT included

Replacement mesh PVA Lenta Fox 35 mm / 5m

6,99 VAT included

Slow PVA mesh tube Fox 25mm

11,90 VAT included

Fox Fine Green Needle

3,99 VAT included

Pva bag manufacturing system 60×130 mm Fox

10,95 VAT included

PVA mesh in tube 25 mm Castaway

9,90 VAT included

Needle for PVA Zfish

1,80 VAT included

Pack PVA Mesh in tube 25 and 35 mm Castaway

14,90 VAT included

Bag manufacturing system pva 75×175 mm Fox

10,95 VAT included

Replacement PVA Mesh Fast Fox 35 mm / 5 m

5,99 VAT included

Replacement mesh PVA Lenta Fox 35 mm / 20m

22,95 VAT included

Fast pva bag Fox 85×220 mm

3,99 VAT included

Kit mesh pva ESP 20 mm

14,25 VAT included

Korda L 85×110 mm pva bag

4,99 VAT included

Nash Narrow PVA Tape – 20m

4,99 VAT included

Fox 35 mm Fast PVA Mesh Tube

11,90 VAT included

Pva bag 80×130 mm Castaway

4,90 VAT included

Replacement mesh PVA Lenta Fox 25 mm / 20 m

22,95 VAT included


Tips for buying the best PVA material for carpfishing

– What is PVA?

PVA is a plastic material that dissolves in water, being in contact with it for a short period of time and leaving no residue. PVA is an excellent material for priming in carpfishing.
The time it takes for the PVA to melt in water will depend on the temperature of the water, so in colder waters, the PVA will take longer to melt than in warmer waters.

– What is PVA used for in carpfishing?

The PVA in carpfishing is used for baiting, that is, to provide extra food to our fish. With the PVA we can create different gadgets that support the bait and allow it to reach the water. With the PVA you can manufacture different essential accessories to continuously prime in carpfishing.

– What carpfishing products are made with PVA?

In the market, we find both thread, bags, meshes, sponges or capsules, all of them made with PVA.
Within this broad category, the most used products in carpfishing are PVA yarn, meshes and bags.

– What are PVA bags and what are they for?

PVA bags are the most commonly used PVA derivative in the carpfishing modality. They are bags inside which we are going to introduce the bait that we want to throw into the water to feed our future catches.
Keep in mind that PVA bags must be as aerodynamic as possible if we want to launch away. That is, the final shape of the bag with the bait inside has to be the one that allows us to go further when we throw, offering little air resistance. To do this, the lower corners will be folded upwards and glued with the help of saliva or water to the side of the PVA bag.
In the PVA bags we will be able to include both the bait and the lead and the hook, making them even more aerodynamic.
If we choose to use a PVA bag that contains a stick mix together with micropellets, we will be able to compact it much more than if we use boilies, being more aerodynamic, but this is up to the fisherman. The most common is to use stick mix to fill the bag. To the stick mix we add liquid to make a compact dough.

– How many types of bags are there?

Depending on how long it takes for PVA bags to get rid of when in contact with water, we will distinguish between slow and fast PVA bags. As the name suggests, fast PVA bags dissolve earlier in water than slow ones. That is why we must make a good choice of the bait we use for each of them.
Slow PVA bags are more resistant to water, so inside them we will introduce especially light bait, of little weight, as seeds. These slow PVA bags will cause the seeds to reach the bottom without dispersing before reaching it and getting lost.
Fast-dissolving PVA bags take less time to dissolve with water, so the bait inside will escape more quickly and be available to fish in less time.
The season of the year also influences the choice of the right PVA bag. As a general rule, in warm times, as the water is at a higher temperature, slow PVA bags are used, so that they do not melt so easily and quickly in the water, preventing the bait from being lost during the trajectory of the bag. However, in cold seasons, the lower water temperature causes PVA bags to take too long to get rid of, so quick bags will be used to speed up this process.
As for its diameter, we can find smaller PVA bags, such as those of 50 x 10 mm, 70 x 100 mm, 85 x 100mm, or larger bags, such as those of 75 x 175 mm, 80 x 160 mm, 60 x 130 mm, among others.

– Which measures of PVA bags are most used in carpfishing?

Despite the existence of various measures in terms of PVA bags, in the carpfishing modality, there are two sizes used par excellence. We refer to the PVA bags of 60 x 130 mm and 75 x 175 mm.
These PVA bags have an ideal and balanced size to throw away and contain a sufficient amount of bait that will be released later.

– What are microperforated PVA bags?

In order to prevent the PVA bag from floating in the water and remaining on the surface, it is essential to drill the PVA bag, thus preventing the air from being trapped inside and exerting resistance to the sinking of the bag.

There are microperforated PVA bags on the market, that is, they have different holes for air to escape and enter the water, thus ensuring that the bag sinks and reaches the bottom.

If the PVA bag does not come microperforated, we will take care of making small holes.

– What are PVA meshes and what are they used for?

Meshes are a cheaper option than PVA bags. They are also somewhat simpler to perform.
The PVA mesh is sold in rolls, which are molded to the tube that will allow us to make the mesh. The lower end of the tube is introduced inside the PVA mesh roll, and at the top end we introduce the bait. With the help of a plunger, we will get the bait to the mesh and press it easily exerting force on said plunger. In this way, we will be left with forceful and aerodynamic PVA meshes.
PVA meshes, having a network structure, do not present the problem of air being trapped inside and making them float, as in PVA bags.
The PVA meshes will be hooked to the hook by one of its slits, but the lead and the hook will not go inside, unlike the PVA bags.
To make PVA meshes, we can buy the kit that includes the mesh roll, the tube and the plunger. Once we finish the PVA mesh, you can buy spare parts of it.
In the same way as in PVA bags, the bait that will contain the mesh is usually a preparation based on stick mix, micropellets and liquids, thus leaving a compact mass that does not escape through the small holes in the mesh. We can also introduce boilies in the PVA meshes, although there will be a less aerodynamic structure when launching it.

– What types of PVA mesh are there?

As for the diameter of PVA mesh roll, there are various measures, among which we find meshes of 17 mm, 18 mm, 20 mm, 25 mm, 32 mm and 35 mm.

PVA meshes of 17 to 25 mm are those used to launch from the shore, generally, while those of 32 and 35 mm are used for boat or baiting boat, due to their greater size and difficulty to be launched at long distances with the rod.

As with PVA bags, there are also slow and fast PVA meshes, depending on the time they need to dissolve in water.

– What are the most used meshes in carpfishing?

Among the available sizes, 25 mm and 35 mm PVA meshes are the most used in carpfishing. The first of these, the 25 mm mesh, is the one usually chosen to launch from the shore. The second option, the 35 mm PVA mesh is the most used for boat and baiting boat.

– What is the PVA thread useful for?

It is a water-soluble thread, composed of PVA and used for priming as well. In this case, with the PVA thread we are going to create a kind of necklaces made from boilies or pellets. That is, PVA yarn cannot be used as PVA meshes and bags for priming with a compact mixture, but the PVA thread is passed through the center of several boilies or pellets. Once this is done, we cut the thread and knot its two ends, thus leaving a structure in the form of a necklace or bracelet composed of boilies or pellets.

– What do we mean if we talk about Foam sponges?

Foam sponges are another derivative of PVA, but this accessory of carpfishing does not serve to bait, unlike thread, bags or PVA meshes.

They are small cylinders, approximately 2 to 5 cm, which are punctured on the hook. These PVA sponges are extremely useful when we are fishing in swamps full of algae or mud, since they make the assembly settle gently on the bottom getting rid of all those obstacles. This is due to the flotation capacity that the PVA sponge has.

Containing PVA, these sponges will dissolve, in part, when in contact with water and will detach from the hook, leaving no traces in it. When the sponge is detached from the hook, it will come to the surface and float for a short period of time, allowing us to know where exactly our cane has fallen, in case we want to bait in the same place using the cobra or any other method.

– PVA capsules, what are they?

The capsules are another derivative of PVA, but very resistant, so we can introduce inside any type of bait we want, even if it is not compatible with PVA.
The capsules are opened in half and the corresponding bait is deposited inside them. When PVA capsules have been in the water for a while, they will decompose and release their contents.
PVA capsules are much easier to prepare than a PVA mesh or bag, but it is a less economical option.
PVA capsules are ideal for rainy days, when other PVA products cannot be used because they are less resistant to water. In addition, some of these capsules come endowed with aroma or flavor, acting as attractants for fish.
These PVA capsules will be hooked on the bottom of our line and can be launched over long distances, because they have a very aerodynamic shape.